Temperature sensors on our server are not working. I checked instructions and in that it was mentioned to download and install lm_sensors-3.1.1-17.el6.x86_64.rpm which I downloaded but on trying to install I am getting following error :
warning: /tmp/lm_sensors-3.1.1-17.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: NOKEY
error: Failed dependencies:
libsensors.so.4()(64bit) is needed by lm_sensors-3.1.1-17.el6.x86_64
lm_sensors-libs(x86-64) = 3.1.1-17.el6 is needed by lm_sensors-3.1.1-17.el6.x86_64
Please download and install lm_sensors-libs-3.1.1-17.el6.x86_64.rpm package
Install using command rpm -Uvh lm_sensors-libs-3.1.1-17.el6.x86_64.rpm
Download lm_sensors-3.1.1-17.el6.x86_64.rpm
Install using command rpm -Uvh lm_sensors-3.1.1-17.el6.x86_64.rpm
Execute following command
sensors-detect
Enter yes for " Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no):"
Enter yes for "Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no):"
You are good to go. You can test with command
sensors
You will get output as something like :
acpitz-virtual-0
Adapter: Virtual device
temp1: +17.8°C (crit = +119.0°C)
temp2: +19.8°C (crit = +119.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +19.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +17.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +18.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +17.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +16.0°C (high = +80.0°C, crit = +100.0°C)
Within 5 minutes, temperatures, indicators and warnings will be enabled and show up in your Tuhund
